Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Colleyville
Installing a driveway gate at a Colleyville property is not the same job as installing one in Hurst or Euless. The homes here are larger, the gates are heavier, and the clay underneath them moves more than most people realize. We quote every installation in writing before any work begins, with the post-footing engineering and operator selection matched to the actual gate you have, not a generic template. If you’re planning a new gate in the Montclair Park area, along Cheek-Sparger Road, or anywhere else in Colleyville, call us at (817) 674-6552 and we’ll walk you through the options that make sense for your property.
Why Vance Gate Repair Coppell Is Colleyville’s Preferred Gate Installation Company
Colleyville homeowners tend to research before they call. They’ve read the three-star reviews on the national companies, they’ve seen the photos of sagging gates on the neighborhood boards, and they want to know exactly what they’re paying for before anyone touches the driveway. That’s the way we already work. Every installation we do in Colleyville starts with a written scope and a written price, handed over before the first post hole is dug. No verbal estimate, no surprise invoice at the end. That’s Clause 1 of our Haven Standard, and it applies on every single job, no exceptions.
We also leave a documented record after we finish. Photos of the footings before concrete, the operator mounted and wired, the limit switches set, the gate traveling full cycle. You get that record. If anything needs adjustment later, any technician you call can see exactly what was done. That is what Adrian Vance started doing in commercial access-control work back in 2014, and we do it on residential Colleyville gates now because a $14,000 ornamental iron gate deserves better than a handshake and a disappearing installer.
Response time to Colleyville is coordinated from our Dallas-Fort Worth dispatch office, with crews working the Colleyville area directly. A live person answers the phone at (817) 674-6552 at every hour, so you’re not leaving a message and hoping someone calls back on Monday.
Our Gate Installation Services in Colleyville
Driveway Gate Installation
Driveway gates in Colleyville are typically 16 to 20 feet wide, built from custom ornamental iron, and paired with operators like FAAC, Elite, or LiftMaster. We engineer the post footings for the actual weight of the gate and the behavior of the clay beneath it. A 20-foot dual-swing gate on shallow footings will sag within two years on this soil. We set posts deep enough that it doesn’t.
Pedestrian Gate Installation
Pedestrian gates here usually match the driveway gate in material and finish, which means they’re custom iron, not off-the-shelf aluminum. We fabricate or order the matching picket profile, set the post with concrete below the frost line and into stable soil, and hang the gate with adjustable hinges so it holds its plumb through wet and dry seasons. Most Colleyville pedestrian gates we install include a keypad or intercom tie-in, since the driveway entry system usually controls both.
Sliding Gate Installation
Cantilever slide gates are common on wider Colleyville driveways, especially where the driveway slopes toward the house or where a swinging leaf would eat too much of the front yard. These gates are heavy. The concrete track pad and the counterbalance post footings have to be right, or the gate binds and burns out an operator within a year. We pour reinforced pads sized to the gate’s full travel and weight, and we set the operator on a concrete base with the chain or rack aligned at installation, not “close enough.”
Swing Gate Installation
Dual-swing ornamental iron gates are the signature look in Colleyville’s estate neighborhoods, and they demand the most from the posts. Each leaf transfers its entire weight and opening force into the hinge post. On Blackland Prairie clay, a single 20-foot gate leaf can easily exceed 700 pounds. We use deep footings with steel rebar cages, and we weld or bolt the hinge brackets to the post before the gate ever hangs. That’s the difference between a gate that stays true and one that drags on the latch every spring.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Colleyville
We install and service operators from DoorKing, Elite, Mighty Mule, and LiftMaster, among others. We’re not tied to a single brand, so the operator recommendation comes from what your gate actually weighs, how wide it is, and how often it cycles, not from what we happen to stock. For Colleyville’s heavy slide and swing gates, we frequently recommend commercial-grade operators that can handle daily cycle counts that would destroy a standard residential opener. Parts for major brands stay stocked locally, and when something needs to be ordered, we tell you the lead time in the written quote.
Common Gate Installation Problems We See in Colleyville Homes
- Post heaving from clay shrink-swell. The Blackland Prairie clay under Colleyville expands when wet and contracts in drought. Gate posts lift, tilt, and lose plumb, which throws the gate out of alignment and trips the safety sensors. We see this every spring and late summer.
- Heavy ornamental gates sagging at the hinge post. The panel looks bent, but the real problem is usually that the post was set too shallow or without rebar. The post pulls out of the clay, and the gate’s weight finishes the job. Our fix is a properly engineered post replacement, not just a hinge shim.
- Operator failure from heat and UV exposure. Sustained North Texas summers bake exposed operators. Circuit boards fail, wiring insulation cracks, and capacitors swell. We mount operators on sun-shaded, ventilated pads where possible and route wiring inside conduit rated for direct exposure.
- Mismatched operator for the gate size. A 20-foot, 900-pound ornamental gate needs more than a standard residential motor. We regularly replace operators that were undersized from day one, usually at the same time we’re correcting the post footings.
Pricing for Gate Installation in Colleyville, TX
A new custom wrought-iron single driveway gate in Colleyville with a basic operator typically runs between $6,800 and $12,500. Dual-swing ornamental gates, which are the standard here, usually land between $11,000 and $22,000 depending on the width, the weight, the operator brand, and whether you’re adding keypad entry, intercom, or vehicle detection. A cantilever slide gate on a reinforced pad starts around $9,500 and can exceed $20,000 on wider driveways with matched fencing. Pedestrian gates run $1,800 to $4,800 installed with hardware. These are installed prices, not estimates that balloon after the concrete truck leaves. We hand you the written price before any work begins, and the price you sign is the price you pay. Call (817) 674-6552 for a free measure and written quote at your Colleyville property.
If you already have another company’s written estimate, bring it. We’ll review it at no cost and give you a second opinion. No pressure, just the facts on paper.
We Also Serve Cities Near Colleyville
Our crews work the entire northeast Tarrant County corridor, including Bedford, Euless, Southlake, and Hurst. If you’re in Colleyville, you’re getting the same team and the same written-price commitment as our Gate Installation work anywhere else. For more about the specific neighborhoods and soil conditions we handle here, see our page on Gate Installation in Colleyville.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Colleyville
Most Colleyville driveway gates go out of alignment because the posts are moving in the clay, not because the gate itself is failing. The Blackland Prairie soil under Colleyville expands after wet springs and contracts during dry summers, and that seasonal movement tilts gate posts by a few degrees over time. A few degrees on a 20-foot gate leaf is enough to make it bind on the latch or trip the safety sensor. The fix is setting deeper post footings with rebar cages, and then checking and adjusting the gate after the first hard rain season. Call (817) 674-6552 for a footing evaluation and written repair quote.
Yes. We match the picket profile, the spacing, the top treatment, and the finish to your existing perimeter fencing so the new gate doesn’t look like a patch. Many Colleyville homes have fencing that was custom-fabricated years ago by shops that no longer exist, so we’ll photograph the existing work, measure the pickets, and send the spec to a fabricator who can reproduce it. The goal is a gate that looks like it was part of the original build.
We typically recommend a commercial-grade operator like a FAAC or LiftMaster slide operator rated for the gate’s full weight and cycle count, mounted on a vibration-isolated concrete pad. Clay movement transfers shock through the track and into the operator, so the mounting matters as much as the motor. We set the pad below the moving clay layer where possible, anchor the operator with the correct bolts, and align the rack or chain so the gate pulls straight. The written quote will state the exact operator model and weight rating.
For a standard Colleyville ornamental iron gate, we set post footings at least 42 to 48 inches deep, and up to 72 inches for a 20-foot dual-swing or cantilever gate, with a rebar cage and concrete poured in a single lift. Shallow footings are the single most common installation defect we correct. The depth isn’t the whole story, though. The footing’s diameter and the rebar matter too, because the clay doesn’t just sink posts, it squeezes them from the side when it swells. Our written quote includes the footing spec, not just a line item that says “concrete.”
Automated driveway gates in Colleyville require non-contact safety sensors, typically photo-eyes mounted at the gate opening, and contact edges or a reversing mechanism as a secondary protection. The exact requirements depend on the gate type and the operator, but we install photo-eyes on every automated gate we put in, regardless of whether the customer asked for them. UL 325 compliance is the baseline. We’ll include the specific sensor package in your written quote. Call (817) 674-6552 if you want a gate that’s safe, documented, and installed to hold up in this soil.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Colleyville and the surrounding area since 2014.