Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Dallas, TX
Gate access control in Dallas means keypads, phone entry, and card readers that sit outdoors in 100-degree summers, February freezes, and violent spring thunderstorms. When a Preston Hollow keypad stops taking codes or a Vickery Meadow phone entry box won’t ring a tenant’s cell, the call usually lands after hours. Reach us at (817) 674-6552 and a live person answers, day or night. Most access-control failures we see in Dallas trace to three causes: water intrusion at the board, failed solder joints on old keypad membranes, and power surges from the summer lightning season.
Why Dallas Homes Are Different
Dallas sits on expansive blackland prairie clay that swells with rain and shrinks hard during summer drought. That clay routinely heaves gate posts out of plumb and cracks concrete footings, which is why structural re-setting and post-footing repair are the dominant call types here, not just operator or hardware failures. In neighborhoods like Preston Hollow, Lake Highlands, and the areas surrounding the Park Cities, original ornamental wrought-iron driveway gates from the 1970s through 1990s are now 30 to 50 years old, with corroded hinges, cracked welds, and failing latches. February 2021 is still working its way through the repair queue: that hard freeze seized automated gate motors, split conduit, and disabled low-voltage control boards in systems installed without cold-weather protection. North Dallas HOA communities and custom-home estates have automated slide and swing gates at both entrances and driveways, so the automated-operator service market here is dense and year-round.
Our Main Dallas Services
Three services generate most of our Dallas calls. Each has its own page with full pricing and scope detail.
Gate Repair in Dallas
Gate repair in Dallas is as much a foundation and alignment business as it is an electronics and hardware trade. When a post leans out of plumb after a wet spring, the gate binds, the opener strains, and the hinges carry load they were never rated for. Our repair work starts with the structure: re-plumb the post, reset the footing if needed, then re-hang the gate and dial the operator. See Gate Repair in Dallas for the full scope and price table.
Gate Installation in Dallas
New gate installation in Dallas has to account for the soil underneath it. We pour footings deeper than code minimums on clay-heavy lots, because the cost of a deeper footing is trivial compared to re-setting a tilted post three years later. Whether it’s a new ornamental driveway gate in Preston Hollow or a community entrance slide gate in Far North Dallas, the installation page covers what we measure, what we order, and what the written price includes. Gate Installation in Dallas has the complete breakdown.
Gate Motor & Opener in Dallas
Dallas gate motors work hard: the heat stresses capacitors, the storms stress surge protection, and the clay soil stress the limit settings as gates drift out of square. When we service an opener, we don’t just swap the board. We check the gate’s alignment first, because a motor that was killed by a binding post will kill its replacement the same way. The Gate Motor & Opener in Dallas page lists common motor failures and exact price ranges.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Dallas
Gate access control in Dallas means the systems that decide who gets in: keypads, remotes, phone entry, card readers, and video intercoms. On Dallas’s older HOA-governed private streets, these systems were often installed in the 1990s and early 2000s, which means boards that predate modern surge protection and keypad membranes that have been sun-baked for two decades. When a storm takes out a board or a keypad stops taking codes, the whole street notices. That’s why we stock common boards and keypad parts locally and run our access-control work through the same Gate Access Control documentation standard: written price before work starts, photo log when we leave.
Keypad Entry
Signs you need it
Codes stop working intermittently, certain digits fail, or the keypad lights but won’t release the gate.
What it costs in Dallas
Keypad replacement in Dallas typically runs $260-$460 installed, depending on the keypad model and whether the existing wire can be reused.
How we do it
We test the wire and power first, then replace the keypad, reprogram the codes, and photograph the new unit and wiring.
Phone Entry
Signs you need it
The call connects but won’t open, the directory has dead entries, or the unit works at the pedestal but not from a cell phone.
What it costs in Dallas
Most phone entry repairs run $420-$780 in Dallas, while full phone entry system replacement with a new cellular unit runs $1,250-$2,800.
How we do it
We test the phone line or cellular module, replace or reprogram the board, update the tenant directory, and leave a printed test log.
Video Intercom
Signs you need it
The video feed is black, audio is one-way, or the inside monitor won’t release the gate.
What it costs in Dallas
Camera and monitor replacement in Dallas typically runs $580-$1,020, while full video intercom systems run $1,150-$3,500 installed.
How we do it
We test each leg of the run, replace the camera or monitor, confirm two-way audio and release, and photograph the final terminations.
What Gate Access Control Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Keypad replacement | $260-$460 |
| Phone entry repair | $420-$780 |
| Video intercom repair | $580-$1,020 |
How fast can you get to a Dallas access-control problem?
Same day in most cases. We stock keypads, boards, and controllers locally and a live person answers (817) 674-6552 around the clock. If we can’t make it the same day, we’ll tell you on the phone, not after you’ve booked.
Do you work with existing access control systems, or only install new ones?
We repair what’s already installed. Most of our Dallas access-control work is on older LiftMaster, DoorKing, and Elite systems that are still serviceable but need a board, a keypad, or a wire repair. Call (817) 674-6552 and describe the symptom.
Gate Parts & Welding in Dallas
Gate parts and welding in Dallas means structural repair, not just swapping a hinge. The blackland clay under Dallas heaves posts out of plumb, cracks footings, and puts stress on welds and hinges that were fine when they were installed in the 1980s. On a Preston Hollow driveway gate that’s tilted, the repair often starts with a torch and a level, not a parts catalog. That’s the work covered in our Gate Parts & Welding service: cut out the cracked weld, re-hang the gate true, and leave the post plumb and the gate swinging on fresh hinges.
Hinge Replacement
Signs you need it
The gate sags, drags at the latch side, or the hinge pin has visible play.
What it costs in Dallas
Hinge replacement in Dallas typically runs $180-$410 per hinge, depending on gate weight and whether the post needs to be re-drilled.
How we do it
We support the gate, cut or unbolt the old hinge, weld or bolt the new one, and re-level the gate before photographing the final alignment.
Post Replacement
Signs you need it
The post has a visible lean, cracked concrete at the base, or movement when the gate cycles.
What it costs in Dallas
Post replacement and re-footing in Dallas typically runs $620-$1,300 per post, depending on depth and whether the old footing has to be broken out.
How we do it
We cut the gate free, remove the old post and footing, pour a new footer at depth, set the post plumb, and let it cure before re-hanging.
Custom Welding
Signs you need it
Cracked pickets, split frame joints, or a gate that’s structurally sound but cosmetically failing.
What it costs in Dallas
Most custom welding repairs in Dallas run $190-$620, depending on the number of joints and the access to the work area.
How we do it
We grind out the crack, weld the joint, and re-paint or touch up the repair before photographing the finished weld.
What Gate Parts & Welding Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Hinge replacement | $180-$410 per hinge |
| Post replacement | $620-$1,300 per post |
| Custom welding repair | $190-$620 |
Can you weld a gate in place, or does it need to come off?
Most repairs weld in place. We support the gate, clean the joint, and weld it where it hangs. For post replacement the gate does come down, and that’s in the written price before we start. Call (817) 674-6552 for a straight answer on your gate.
Do you stock parts for old ornamental gates in Dallas?
We keep common hinges, rollers, latches, and steel stock in Dallas, and we fabricate brackets that aren’t made anymore. If your 1980s gate needs a part that’s out of production, we make it rather than replace the gate.
Brands We Service in Dallas
We service DoorKing, Elite, LiftMaster, and Mighty Mule systems across Dallas, with common boards and keypads stocked locally for faster turnaround. If your opener is from a brand that isn’t listed, call us anyway, most access-control hardware crosses brands cleanly. See our brands for the full list.
Pricing for Gate Repair in Dallas, TX
| Service | Typical range in Dallas |
|---|---|
| Keypad replacement | $260-$460 |
| Phone entry repair | $420-$780 |
| Video intercom camera/monitor replacement | $580-$1,020 |
| Full phone entry replacement | $1,250-$2,800 |
| Full video intercom system | $1,150-$3,500 |
| Hinge replacement | $180-$410 per hinge |
| Post replacement and re-footing | $620-$1,300 per post |
| Custom welding repair | $190-$620 |
What pushes price up in Dallas is the clay. A post that’s tilted usually needs a new footing, not just a reset, and that means breaking out concrete that’s been in the ground for 30 or 40 years. The written price we hand you before any work starts includes that work, not just the metal above ground.
Neighborhoods We Serve in Dallas
We run calls across Dallas daily. Most of our access-control and structural work centers on the older automated-gate neighborhoods where systems are aging, but we cover newer HOA communities and private-street developments just as often.
- Preston Hollow
- Lake Highlands
- Vickery Meadow
- Far North Dallas
- Bluffview
Response time across Dallas is typically same-day for repairs, sometimes next-morning if the call comes late. We’ll tell you on the phone.
Service Area - Cities Near Dallas
From our Dallas-Fort Worth metro office, crews serve the surrounding cities directly. If your gate is in Irving, TX, Grand Prairie, TX, Carrollton, TX, or Coppell, TX, the same written-price and photo-documentation standard applies.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Dallas
Same day for most repairs. A live person answers (817) 674-6552 at any hour and can tell you whether a technician can reach your part of Dallas that day or the next morning. Emergency calls after big storms or a hard freeze get prioritized by severity.
Most residential gate repairs in Dallas don’t require a permit, but HOA-governed communities often have architectural standards for replacements and automation changes. We can note the HOA requirements in the written scope before any work starts if your street has them.
We give a written price before any work starts, not a verbal estimate over the phone. Describe the problem and we’ll tell you the typical range for that repair in Dallas, then confirm the exact written price on site before tools come out.
If your gate needs work in Dallas, call (817) 674-6552. A live person answers, the price is written before anything starts, and you get a photo record of everything we found and everything we did.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dallas Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.