Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Carrollton
A new driveway gate in Carrollton typically costs $2,800-$9,500 installed, depending on whether you need a standard aluminum swing gate or a custom-fabricated ornamental iron double gate matched to your HOA’s original spec. Most installations take 2-4 days from measure to final walkthrough, and we hand you a written price before anything gets ordered or cut. If you live off Rosemeade Parkway, in Indian Creek, or anywhere else in Carrollton, call (817) 674-6552 and a live person answers, day or night.
Carrollton’s gate stock is different from what you’ll find ten minutes south in Addison or Farmers Branch. The 1980s and 1990s HOA subdivisions here produced thousands of ornamental iron and aluminum gates that are now aging in sync. Many of them sit on undersized posts set directly into Blackland Prairie clay. That combination creates a specific set of installation and repair challenges, and it’s one our crews work with every week.
Why Vance Gate Repair Coppell Is Carrollton’s Preferred Gate Installation Company
We have been installing and rebuilding gates since 2014, and the work in Carrollton skews toward custom. When an HOA architectural board says the replacement gate has to match the original 1994 ornamental iron pattern, you can’t pull something off a shelf. You fabricate it. That is what we do, and it is a big part of why Carrollton HOA boards and property managers keep our number on file.
Our technicians are background-checked, uniformed, and you get a name and a photo before they arrive. Every job, including a straightforward pedestrian gate install, includes a documented photo record: what was found, what was set, what was installed. That record is left with you and filed in our job history. Under our Haven Standard, the written price is handed over before work starts, and every installation is covered by our 365-Day Done Right Promise.
When a Rosemeade homeowner calls about a driveway gate that has leaned over the summer, we do not guess. We measure the post lean, check the hinge plate, and look at the soil around the footing. Then we show you the findings, in writing, with a price. That’s the difference between a contractor quoting over the phone and a crew standing in your driveway with a level and a tape measure.
Our Gate Installation Services in Carrollton
Driveway Gate
Driveway gate installation in Carrollton almost always involves one of two scenarios: replacing a failed gate on an existing HOA lot, or adding an automated gate to a home on a wider lot near Hebron Parkway or west of Josey Lane. We measure the driveway opening, check the swing radius against landscaping and utility lines, and specify post footings sized for Carrollton’s clay soil rather than a generic spec. A standard single swing aluminum driveway gate starts around $2,800 installed; a heavier custom iron gate with automation runs higher.
Pedestrian Gate
A pedestrian gate is the side-yard gate people actually use every day. In Carrollton, most are ornamental iron or powder-coated aluminum set between a brick wall and the house. We install new posts, hang the gate, set the latch and closer, and if you want keypad or card access, we wire it. Expect $900-$2,200 for a quality pedestrian gate installation depending on width, material, and hardware.
Sliding Gate
Sliding gates are common on Carrollton’s larger properties and along the industrial corridor off I-35E. A cantilever sliding gate needs a properly engineered track or roller system and a strong top rail, and Carrollton’s clay soil makes slab movement a real concern. We pour and pin the foundation properly, set the gate, and install the operator with safety photocells. Sliding gate installations in Carrollton typically run $4,500-$12,000 depending on length and whether automation is included.
Swing Gate
Swing gates are the dominant style across Carrollton’s HOA subdivisions. Single and double swing gates need posts that stay plumb. In Carrollton, that means footings dug below the active clay zone, rebar tied in, and often a hinge-side post that’s thicker than the gate side. We also verify entrapment protection on every automated swing gate, because a gate that closes against a child or pet is a liability no homeowner should carry. Swing gate installations run $2,800-$8,500, with double gates and custom iron at the upper end.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Carrollton
We install and service operators from LiftMaster, DoorKing, Elite, and Mighty Mule, among others. We don’t steer you toward a new motor when a board or a limit switch will fix the problem. In Carrollton, we stock common boards, battery backups, and safety photocells for the late-1990s and early-2000s Linear and LiftMaster units that are now failing across the city’s older HOAs. If your HOA-mandated ornamental iron style needs custom-fabricated parts, we can make those too, rather than asking you to accept a mismatched replacement.
Common Gate Installation Problems We See in Carrollton Homes
- Clay soil heaving tilts hinge posts seasonally. A post that was plumb in April can lean visibly by late August as the Blackland Prairie clay shrinks. Re-setting a post without a deeper, properly anchored footing just means you’ll do it again next spring.
- Obsolete operators failing in waves. Late-1990s Linear and early LiftMaster units across Carrollton HOAs are hitting end-of-life at the same time. Logic boards fail, battery backups die, and the entrapment protection stops working. We can replace boards, batteries, or the entire operator without replacing a perfectly good gate.
- Spring hailstorms dent aluminum panels. A hail event that glances off a roof can wreck a lightweight aluminum driveway gate. Panels get dented, frames get torqued, and HOA style guidelines mean the replacement has to match. We fabricate replacement panels to the original pattern.
- Undersized posts from the original build. Many 1980s and early 1990s Carrollton gates were set on posts too thin for the gate weight, even before the soil started moving. Hinge-side lean is a chronic return-repair issue. We replace undersized posts with properly sized, rebar-reinforced footings.
Pricing for Gate Installation in Carrollton, TX
For a standard single swing aluminum driveway gate, Carrollton homeowners should budget $2,800-$4,500. A pedestrian gate runs $900-$2,200. Double ornamental iron driveway gates, especially custom-fabricated to match HOA guidelines, land between $5,500 and $9,500. Sliding gates start around $4,500 and can exceed $12,000 for long industrial units with heavy automation. A new operator added to an existing gate typically adds $1,200-$3,800 depending on brand and whether photocells, keypads, or battery backups are included.
Every one of those numbers is written down and handed to you before anything gets ordered. No verbal estimate, no surprise invoice at the end. The written price is the price. Call (817) 674-6552 and we’ll schedule a free measure and give you a quote you can hold.
| Gate Type | Typical Carrollton Range |
|---|---|
| Pedestrian Gate | $900-$2,200 |
| Single Swing Driveway Gate | $2,800-$4,500 |
| Custom Ornamental Iron Double Gate | $5,500-$9,500 |
| Sliding Gate (residential) | $4,500-$9,000 |
| Sliding Gate (commercial/long span) | $9,000-$12,000+ |
| Operator/automation add-on | $1,200-$3,800 |
We Also Serve Cities Near Carrollton
Our Gate Installation crews work across the DFW metro. In addition to Gate Installation in Carrollton, we serve Coppell, Plano, Grapevine, and Dallas. Call (817) 674-6552 for scheduling anywhere in the area.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Carrollton
Carrollton sits on Blackland Prairie clay, which swells when wet and shrinks dramatically in 100°F+ summers. If the original post footing was too shallow or too narrow, the seasonal soil movement will tilt the post year after year. The fix is a deeper footing with rebar reinforcement, set below the active clay zone, and sometimes a thicker post. Call (817) 674-6552 and we’ll measure the lean and give you a written price to fix it permanently.
Yes. We custom-fabricate replacement gates and panels to match Carrollton HOA architectural guidelines, including the original ornamental patterns in subdivisions like Rosemeade, Indian Creek, and Carillon. If your HOA requires the 1990s wrought-iron look, we match it rather than delivering an off-the-shelf gate that gets rejected by the architectural review board. Bring us the HOA spec or a photo of the original, and we’ll handle the fabrication.
Usually not. A dead late-1990s Linear or early LiftMaster operator often just needs a new logic board, a battery backup replacement, or a repaired limit switch. We service nine automation brands and will tell you what actually failed before recommending a replacement. If the operator does need to go, we can install a current LiftMaster or DoorKing unit on your existing gate without changing the ironwork. Call (817) 674-6552 and we’ll diagnose it on site, in writing.
Yes. Automated gates in Carrollton must have functioning entrapment protection, typically photocells and a reversing mechanism, to comply with UL 325 standards. If your gate operator is old enough that the entrapment protection has failed, that’s a safety issue, not a convenience issue. We test every automated gate we touch and include the results in your documented photo record. A gate that doesn’t reverse on obstruction should be serviced immediately.
Three things: a properly sized operator, correctly set limit switches, and hinge posts that stay plumb. In Carrollton’s clay soil, that means a properly poured footing, usually deeper than the original build. We set the opener travel limits so the gate never slams or strains, balance the gate on its hinges, and photograph the final limit-switch readings so the next adjustment is a comparison, not a guess. A heavy gate that runs silently is a gate that was installed correctly. Call (817) 674-6552 for a free measure and written price.
Schedule Your Carrollton Gate Installation
If you’re in Carrollton and need a driveway gate, pedestrian gate, sliding gate, or a custom security gate matched to your HOA’s original style, call (817) 674-6552. A live person answers, 24/7, and we’ll schedule a measure and hand you a written price before any work starts. That’s the Haven Standard, and it applies to every gate we install in Carrollton.
Written by Adrian Vance, Owner at Vance Gate Repair Coppell, serving Carrollton since 2014.
Gate Installation in Nearby Areas