Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in North Richland Hills, TX
Gate access control and gate parts repair in North Richland Hills usually means working on 30-to-40-year-old cedar and ornamental iron gates set in expansive clay soil that never stops moving. Keypads short out after spring storms, hinges tear loose when posts heave, and welds crack after freeze-thaw cycles. Most jobs run between $145 and $2,800 depending on the part and the subsoil under the post. Call (817) 674-6552 and we’ll give you a written price before any work starts.
Why North Richland Hills Homes Are Different
North Richland Hills was built out fast in the 1980s and early 1990s, and the gates hung on those tract homes are aging out together. The clay under NRH is Blackland Prairie soil: it swells after spring rain and shrinks in the summer heat, which pushes posts out of plumb season after season. A cedar gate post set in 1988 without a sleeve at grade has spent 35 years wicking moisture into the end grain while the visible upper post still looks fine. We see that failure constantly on Bursey Road and the older cul-de-sac streets off Davis Boulevard. Homeowners call expecting a hinge swap and find the post rotted at the base. The February 2021 ice storm added its own damage, warping ornamental iron and wood gates that were never designed for sustained freeze-thaw stress. All of this means North Richland Hills gate work is less about the gate itself and more about what the soil and the decades have done underneath it.
Our Main North Richland Hills Services
North Richland Hills homeowners call us most for three things: a gate that stopped opening, a gate that needs to be replaced, or a motor that no longer responds. Here is what each job involves locally.
Gate Repair in North Richland Hills
A sagging cedar gate off Rufe Snow Drive usually has a rotted post base and a seized hinge, which means we dig out the old post, set a new one below grade with proper drainage, and re-hang the gate so it swings true. Ornamental iron gates in NRH often need weld repair after an ice storm or a decade of clay movement. The written quote covers the whole repair. See Gate Repair in North Richland Hills for the full scope.
Gate Installation in North Richland Hills
New gates in North Richland Hills need posts set deeper than the minimum because of the expansive clay, plus hardware selected for a gate that will face 105-degree summers and occasional ice. We measure, order, and install cedar, steel, or ornamental iron to fit the existing opening and HOA requirements if any apply. A free measure comes with a written price. See Gate Installation in North Richland Hills.
Gate Motor & Opener in North Richland Hills
Early-2000s automatic openers around North Tarrant Parkway are now at the end of their service life. We repair or replace LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we photograph every limit-switch setting before we leave. The written price covers parts and labor. See Gate Motor & Opener in North Richland Hills.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in North Richland Hills
Gate access control in North Richland Hills means keypads, remotes, phone-entry systems, card readers, and video intercoms mounted on gates that sit in punishing clay soil and weather. The soil shifts the gate frame, the gate drags or binds, and the control systems wired onto that frame short out, misalign, or tear loose. A keypad that worked fine in March can fail after the first heavy May storm because the gate post moved a quarter inch and pulled a connection. We supply and install access control that holds up to movement, heat, and the occasional ice storm, and every job includes a written price before we touch a wire. For detail on the full range, see Gate Access Control.
Keypad Entry
Signs you need it
The keypad lights but the gate does not move, or codes stop working after rain.
What it costs in North Richland Hills
Keypad replacement in NRH runs $145 to $400 installed, depending on the brand and whether we need to re-run the wiring.
How we do it
We test the circuit, replace or reprogram the keypad, seal the housing against moisture, and photograph the wiring before we close it up.
Remote Control
Signs you need it
The remote works only from a few feet away or stops opening the gate entirely.
What it costs in North Richland Hills
Replacement remotes run $50 to $115 programmed, and receiver replacement runs $120 to $380.
How we do it
We check the receiver, test signal strength against the operator, program the new remote, and confirm range from the street before we leave.
Phone Entry
Signs you need it
Callers hear ringing but the gate never opens, or the system drops calls after a storm.
What it costs in North Richland Hills
Phone-entry hardware runs $480 to $1,300 installed, with wiring diagnostics included.
How we do it
We trace the line, confirm the relay fires, replace the controller if needed, and test the full call-to-open sequence at the gate.
What Gate Access Control Costs in North Richland Hills
| Item | Typical range in North Richland Hills |
|---|---|
| Keypad replacement | $145 - $400 |
| Remote control replacement | $50 - $115 |
| Phone entry system | $480 - $1,300 |
How much does a gate keypad cost in North Richland Hills?
Most keypad replacements run $145 to $400 installed. The range depends on whether we splice into existing wiring or pull new wire through conduit. Call (817) 674-6552 for an exact written quote.
Can you fix a gate access system the same day in North Richland Hills?
Yes. Most keypad and remote failures are same-day jobs. Phone-entry and card-reader work may take a day longer if parts need to be ordered. Call (817) 674-6552 and we’ll tell you when we can be there.
Gate Parts & Welding in North Richland Hills
Gate parts and welding in North Richland Hills usually means repairing steel and ornamental iron that has cracked, shifted, or torn at the hinge. The clay soil under NRH pushes posts out of line seasonally, and that movement transfers stress straight to hinges, welds, and rails. A gate that worked for 20 years can split a weld in one dry summer as the post leans and the gate hangs on the bead. We replace parts and weld repairs on-site, and because we photograph every repair, the next technician who works on that gate knows exactly what we did. See Gate Parts & Welding for the full parts list.
Hinge Replacement
Signs you need it
The gate scrapes the ground or the hinge bolts show gaps and rust staining.
What it costs in North Richland Hills
Hinge replacement runs $100 to $350 per hinge, including shimming and realignment.
How we do it
We lift the gate, remove the old hinge, weld or bolt the new one, and photograph the plumb line once it hangs true.
Post Replacement
Signs you need it
The post leans more than half an inch out of plumb or the gate binds against the latch.
What it costs in North Richland Hills
Post replacement runs $375 to $875 per post, including concrete and haul-off.
How we do it
We cut and remove the old post, set a new one below the frost line in fresh concrete, and re-hang the gate after the pour cures.
Rail Repair
Signs you need it
A rail sags, a top rail has pulled from the pickets, or weld points show cracking.
What it costs in North Richland Hills
Rail repair runs $75 to $180 per repair point, depending on steel thickness and access.
How we do it
We grind the cracked area clean, weld the seam, and photograph the repair before and after.
What Gate Parts & Welding Costs in North Richland Hills
| Item | Typical range in North Richland Hills |
|---|---|
| Hinge replacement | $100 - $350 per hinge |
| Post replacement | $375 - $875 per post |
| Rail repair | $75 - $180 per point |
Can you weld a gate without removing it in North Richland Hills?
Usually yes. We weld most rail and hinge repairs on-site with the gate in place. Full post replacement requires removal. Call (817) 674-6552 for a written quote.
How much does it cost to fix a sagging gate in North Richland Hills?
A sagging gate usually needs a hinge or post repair, which runs $100 to $875 depending on what has failed. We diagnose and quote before starting. Call (817) 674-6552.
Brands We Service in North Richland Hills
We service BFT, Linear, Viking, and Ghost Controls operators in North Richland Hills, along with five other major automation brands. Common parts like remotes, receivers, and photo-eyes are stocked in our local service vehicles. See our brands for the full list.
Pricing for Gate Repair in North Richland Hills, TX
| Service | Typical range in North Richland Hills |
|---|---|
| Keypad replacement | $145 - $400 |
| Remote control replacement | $50 - $115 |
| Phone entry system | $480 - $1,300 |
| Hinge replacement | $100 - $350 per hinge |
| Post replacement | $375 - $875 per post |
| Rail repair | $75 - $180 per point |
What pushes a North Richland Hills gate repair higher is post movement: if the clay has thrown a post far enough out of plumb, the post work has to happen before the hinge or the motor work does. Soil that has heaved a post more than an inch often means a full replacement rather than a shim. Whatever the job, the written price you get before we start is the price you pay when we finish. No surprise line items, no invoice at the end that does not match the quote.
Neighborhoods We Serve in North Richland Hills
We work every neighborhood in North Richland Hills, including:
- Rufe Snow Drive corridor
- North Tarrant Parkway communities
- Bursey Road and surrounding streets
- Davis Boulevard area
- Home Town North
We get to most North Richland Hills addresses within one business day of the call, and faster for a gate that will not close.
Service Area - Cities Near North Richland Hills
We also serve Hurst, TX, Bedford, TX, Colleyville, TX, and Keller, TX. Dispatch and scheduling are coordinated from the Dallas-Fort Worth office, and crews serve North Richland Hills locally.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in North Richland Hills
Many NRH neighborhoods have HOA design guidelines for front-facing gates, especially replacement gates. Repairs that keep the existing gate usually do not need approval. We can work from your HOA’s written spec if one applies.
Most non-closing gates are addressed the same day or the next business day. A gate stuck open is a security issue, so we prioritize those calls. Call (817) 674-6552 and a live person answers 24/7.
Soil movement is ongoing in NRH, but a properly set post with drainage at grade reduces the seasonal heave. We set replacement posts deeper than the original 1980s standard and sleeve the base where moisture collects.
Call (817) 674-6552 for a free estimate on any gate repair, gate installation, or gate motor job in North Richland Hills.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Richland Hills Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.