Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Southlake, TX
Gate access control in Southlake usually means one of two jobs: retrofitting a keypad or intercom onto a 20-year-old ornamental iron gate, or replacing an HOA entry system that has been patched too many times. Southlake’s estate homes, most built between 1995 and 2015 on half-acre-plus lots, carry heavy automated gates that are now hitting their first major control-system failure cycle. The black-clay soil under Southlake shifts every wet spring and dry summer, which moves posts, distorts gate frames, and slowly pulls wiring loose inside the operator. That means the access control problem you see at the keypad is often a wiring or alignment problem fifteen feet away. Call (817) 674-6552 and we’ll find it the first time.
Why Southlake Homes Are Different
Southlake sits on the western edge of the Blackland Prairie, where expansive clay soils swell after winter rain and shrink through summer drought. That repeated movement shifts gate posts out of plumb, which binds hinges, drags gate leaves, and pulls the low-voltage wiring that feeds keypads, intercoms, and loop detectors. A gate that worked fine in October can bind in April and short out by August.
The housing stock concentrates the problem. Timarron, Carillon, and Clariden Ranch were built during the same 1995 to 2015 window, and nearly every home came with a heavy ornamental iron or powder-coated steel swing gate running a premium hydraulic ram or heavy-duty swing operator. Those systems are now 15 to 25 years old. Winter Storm Uri in February 2021 froze and cracked hydraulic actuator cylinders and killed control boards across Southlake; many homeowners replaced only the obvious failed part at the time, and the secondary damage is showing up now. We regularly find a new control board bolted to a 20-year-old hydraulic ram that is weeping fluid.
HOA-governed community entry monuments add another layer. Dual swing or slide gates at neighborhood entrances run commercial-grade equipment and need documentation for the HOA board, not just a repair. That fits how we work: written price before work starts, photographed record when we leave.
Our Main Southlake Services
Two services account for most of the calls we take from Southlake homeowners, but three others deserve their own pages because the work is different enough to matter.
Gate Repair in Southlake
When a Southlake estate gate stops mid-travel or grinds against the post, the cause is usually soil movement rather than a dead motor. We re-plumb posts, rebuild hinges, and reset limit switches, then photograph the new positions so the next issue does not require starting from zero. Read the full breakdown at Gate Repair in Southlake.
Gate Installation in Southlake
New gate work in Southlake means designing for clay soil from day one: deeper post footings, reinforcement where the operator mounts, and a gate leaf that can tolerate years of micro-movement without binding. We measure, quote in writing, and schedule the install. Details are on the Gate Installation in Southlake page.
Gate Motor & Opener in Southlake
Southlake’s original hydraulic and heavy-duty swing operators are aging out at roughly the same time. When a motor fails, we check whether the arm bracket, the wiring run, and the post are still sound before recommending a replacement, because replacing a motor on a shifting post just burns the new motor out. See Gate Motor & Opener in Southlake for the full scope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Southlake
Gate access control in Southlake means the keypad, intercom, card reader, or phone-entry system that tells the gate operator to open. The housing era here matters: gates built between 1995 and 2015 were wired for access systems that are now obsolete, and the clay soil has spent two decades pulling at every buried low-voltage line. What looks like a dead keypad is frequently a broken wire or a corroded splice under the driveway. We diagnose the whole path from keypad to operator before quoting a replacement. See our full Gate Access Control service page for the complete scope.
Keypad Entry
Signs you need it
The keypad works at the house but not at the gate, or codes work intermittently after rain.
What it costs in Southlake
Keypad entry repair in Southlake runs $150 to $450 depending on whether we replace the keypad, the wiring, or both.
How we do it
We test voltage at the keypad, trace the wiring to the operator, replace what failed, and photograph the repair.
Video Intercom
Signs you need it
The gate camera is dark, audio is one-way, or the inside monitor keeps losing the gate.
What it costs in Southlake
Video intercom repair in Southlake typically runs $250 to $700 depending on whether the issue is wiring, the camera unit, or the monitor.
How we do it
We isolate the failure to the camera, wire run, or monitor, replace the failed component, and leave a photo record of the new connections.
What Gate Access Control Costs in Southlake
| Item | Typical range in Southlake |
|---|---|
| Keypad entry repair | $150 - $450 |
| Video intercom repair | $250 - $700 |
| Full access control retrofit | $800 - $1,800 |
Can you add a keypad to an existing Southlake gate?
Yes. Most operators from DoorKing, Elite, and LiftMaster have an accessory input for a wired keypad. We run new low-voltage wire, mount the keypad, program the codes, and document the wiring.
Why does my gate intercom work after rain but fail in summer?
Southlake’s clay soil pulls buried wiring apart as it dries. A splice that holds when the ground is wet can separate when the soil shrinks. We locate the break and replace the damaged run.
Gate Parts & Welding in Southlake
Gate parts and welding in Southlake usually means rebuilding a heavy ornamental iron gate that has spent two decades flexing with the clay soil. Hinges wear egg-shaped, posts lean, and welds crack at the stress points. We replace the part or weld the joint, then dress and paint the repair so it disappears. See our Gate Parts & Welding page for the full parts list and welding scope.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, drags on the ground, or makes a grinding sound when it opens.
What it costs in Southlake
Hinge replacement on a Southlake ornamental gate runs $180 to $450 per hinge depending on weight and accessibility.
How we do it
We support the gate leaf, cut out the worn hinge, weld in the new one, and realign the gate to clear the post.
Post Replacement
Signs you need it
The post leans visibly, the gate hits the ground on one side, or the operator struggles against a post that has moved.
What it costs in Southlake
Post replacement in Southlake runs $450 to $1,100 per post including concrete and gate re-hanging.
How we do it
We pull the old post, set a new one deeper with proper concrete, re-hang the gate, and photograph the plumb check.
What Gate Parts & Welding Costs in Southlake
| Item | Typical range in Southlake |
|---|---|
| Hinge replacement (per hinge) | $180 - $450 |
| Post replacement (per post) | $450 - $1,100 |
| On-site weld repair | $150 - $350 |
Can you weld a cracked ornamental iron gate on site?
Yes. We grind the crack, weld it, and dress the joint. On painted gates we match the finish close enough that the repair does not stand out from ten feet.
How long does a post replacement take in Southlake?
One post is usually a same-day job except for concrete cure time. We set the post, brace it, and return to re-hang the gate once the concrete has set, typically within two days.
Brands We Service in Southlake
We work on whatever is already on the gate. DoorKing, Elite, Mighty Mule, and LiftMaster are the names we see most often in Southlake, and we keep common parts for all of them in local stock. That usually means same-week turnaround instead of waiting on a distributor. See our brands for the full list of nine automation lines we service.
Pricing for Gate Repair in Southlake, TX
| Service | Typical range in Southlake |
|---|---|
| Keypad entry repair | $150 - $450 |
| Video intercom repair | $250 - $700 |
| Full access control retrofit | $800 - $1,800 |
| Hinge replacement (per hinge) | $180 - $450 |
| Post replacement (per post) | $450 - $1,100 |
| On-site weld repair | $150 - $350 |
| Gate opener motor replacement | $650 - $1,400 |
| Control board replacement | $350 - $650 |
| Safety photo-eye replacement | $150 - $300 |
What pushes a Southlake price up: a gate that is out of plumb from soil movement, wiring that has been pulled apart underground, or a mismatched repair where a previous fix hid the real problem. Whatever we find, the price is written before we start. No surprise invoice at the end.
Neighborhoods We Serve in Southlake
Most of our Southlake work happens in the established estate neighborhoods built between 1995 and 2015, where ornamental iron gates and automation are standard. Response time across the city is usually same day or next morning, depending on when you call.
- Timarron
- Carillon
- Clariden Ranch
- Southlake Woods
- Estes Park
Service Area - Cities Near Southlake
We also cover the surrounding communities where the same clay soil and estate gate inventory create the same problems: Colleyville, TX, Grapevine, TX, Flower Mound, TX, and Bedford, TX. Dispatch is coordinated from our Dallas-Fort Worth office; crews serve Southlake locally.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Southlake
Same day in nearly all cases. A live person answers (817) 674-6552 at any hour, and we dispatch a technician to Southlake with the common parts for the brands we see most often on the truck.
For a repair that matches the existing gate, usually not. For a new gate or a visible change like a different operator or keypad, check your HOA’s architectural guidelines. We can provide a written scope for the board.
Yes. Dual swing and slide gates at HOA entries are a regular part of our work here. We document every visit with photos and a written summary so the board has a record of what was found and what was changed.
If your Southlake gate is binding, dead at the keypad, or sagging on its hinges, call (817) 674-6552. We’ll give you a written price before any work starts, do the repair, and leave you a photo record of what we found and what we fixed.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Southlake Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.