Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Installation in Keller, TX: What It Costs and How It’s Done
Gate installation in Keller typically runs $2,800 to $9,500 for a standard ornamental steel driveway gate with automation, and $12,000 to $30,000+ for custom fabricated estates with underground operators, matched entry systems, and heavy-duty swing hardware. Most Keller installations take 1 to 3 days on-site once materials are fabricated, with 3 to 6 weeks of lead time for custom builds. We quote every job in writing before any tool leaves the truck.
Keller’s housing stock is different from most DFW suburbs, and it changes how a gate has to be built. You’re not working with a light aluminum panel on a zero-lot-line yard. You’re working with 14- to 20-foot ornamental steel leaves, powder-coated to an HOA-approved finish, hung on posts that have to survive Blackland clay movement and hard freezes. That’s the work we do most in this city. Call (817) 674-6552 and we’ll walk your property, measure the opening, and put the number in front of you before you decide anything.
Key Takeaways for Keller Homeowners
- HOA approval comes first. Several Keller neighborhoods require written architectural review before gate hardware, finish colors, or automation are changed. We’ll help you identify whether your property needs paperwork before the job starts.
- Clay soil is the biggest variable. A gate set on shallow footings in Blackland prairie clay will bind within a year. Our installs use deep piers and cured concrete, and we document the footing depth with photos.
- Written price, always. You get a flat number on paper before work begins, not a range that shifts after the posts are in the ground.
- Custom match is standard. If your existing gate has a specific powder coat, picket profile, or finial style, we match it rather than swapping in whatever is on the shelf.
Why Vance Gate Repair Coppell Is Keller’s Preferred Gate Installation Company
Keller homeowners call us for the same reason commercial property managers did when Adrian Vance started doing access-control work in 2014: the job gets documented. Every Gate Installation we run includes a written scope, a written price, and a photo log of what was set, what was wired, and what the finished product looks like. That’s Clause 4 of our Haven Standard, and it applies to every gate we hang in Keller, from Hidden Lakes to Marshall Ridge.
Our crews are in Keller weekly. We know which neighborhoods run HOA design-review boards that will reject a mismatched bronze tone, which lots sit on clay that swells aggressively after fall rains, and which older estate gates from the 1995-2005 buildout are nearing replacement age. That local knowledge means fewer surprises on install day and fewer callbacks after it. Keller homeowners who have used us tend to mention two things: the price didn’t move, and they have a full photo record of the work.
We’re not the cheapest gate company in Keller, and we won’t pretend to be. We’re the one that writes the number down before the job starts, shows up with a named technician whose photo you receive in advance, and stands behind the work for a full year under our 365-Day Done Right Promise. If something isn’t right, we make it right. No argument, no fee.
Before
AfterOur Gate Installation Services in Keller
Swing Gate Installation
Swing gates are the dominant style across Keller’s estate neighborhoods, and they carry the greatest demand for precise fabrication. We build and hang single and double swing gates in steel, wrought iron, and custom ornamental profiles, with heavy-duty hinges rated for the leaf weight. In Keller’s clay soil, the hinge posts matter as much as the gate itself. We sink posts below the shrink-swell zone and cure the concrete fully before any leaf is hung. A swing gate installed without that attention to footing work will heave out of square within a year, and we’d rather do it once.
Driveway Gate Installation
Keller driveways are long, which means the gate operator has to work harder and cycle more frequently. We spec operators matched to the gate’s weight and duty cycle, not whatever is on the truck. For estates in neighborhoods like Hidden Lakes and Bella Lago, we commonly install underground operators, loop detectors, and keypad or intercom entry. The goal is a driveway gate that opens smoothly every time, for years, without the operator straining against a misaligned leaf. We also run the power and low-voltage wiring cleanly, in conduit, with the runs photographed before backfill.
Security Gate Installation
A Keller security gate is not a decorative panel with a latch. It’s an access-control system that happens to be a gate. We install gates integrated with keypads, card readers, intercom systems, and camera entry, sized to the opening and rated for the duty cycle of daily use. For properties that need it, we’ll spec crash-rated hardware and redundant operator logic. Every security gate we install in Keller includes entrapment protection compliant with UL 325: photo-eyes, contact edges, or both, positioned and tested before we call the job done.
Pedestrian Gate Installation
Pedestrian gates in Keller are often the forgotten entry point: the side gate from the driveway to the backyard, the pool enclosure gate, the utility gate on the side of the property. We build and hang pedestrian gates that match the driveway gate’s profile and finish, with self-closing hinges where code requires them. Pool enclosure gates in Keller must self-close and self-latch to meet local code, and we set the hardware accordingly.
Sliding Gate Installation
Sliding gates are less common in Keller than in commercial settings, but they show up on some acreage parcels and a few long-driveway estates where a swing gate would eat too much open space. We install cantilever and V-track sliding gates with the right track, rollers, and operator matched to the gate’s length and weight. On horse-property tracts that still run on Keller’s outer edges, we’ll often pair a heavy sliding pipe gate with a Ghost Controls or Viking operator, or leave it manual if that’s what the property needs.
We don’t push automation where a manual gate makes more sense. On a ranch gate that opens twice a week, a mechanical slide latch is sometimes the better tool. We’ll tell you that, and we’ll put it in writing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Field Notes: A Hidden Lakes Swing Gate Install
Off Bear Creek Parkway in Hidden Lakes, we set two 18-foot ornamental swing gates on new powdered posts with fresh footings after the old posts heaved out of square. The original install had been done on shallow concrete, likely twenty years ago, and the clay did what Blackland prairie clay does. We dug the piers deep, cured them properly, hung the leaves with matched FAAC operators, tied in a keypad and loop detector, and matched the original bronze powder coat exactly. The homeowner had already filed their HOA approval packet before we ever trenched a line. That’s the correct order, and we’ll walk you through it.
Common Gate Installation Problems We See in Keller Homes
- Posts heaving out of square. Keller’s Blackland prairie clay contracts hard in summer drought and swells after fall and winter rain. Shallow footings shift, the hinge post leans, and the gate binds. We pour deep piers below the active shrink-swell zone and photograph the depth before backfill.
- HOA finish mismatches. A stock bronze or black powder coat that looks close enough on a color card can be visibly wrong on a 16-foot gate leaf next to existing fencing. Several Keller HOA architectural review boards will flag it, and the homeowner gets stuck redoing the work. We match finish and profile before we fabricate.
- Undersized operators on heavy gates. A big ornamental swing gate in Keller can weigh 600 to 1,200 pounds per leaf. Installing a light-duty operator rated for far less means early motor failure, usually within a couple of seasons. We spec operator duty cycle to the actual gate weight, not the sales sheet’s best-case number.
- Freeze-damaged automation. The February 2021 freeze wrecked hydraulic actuators and control boards across Keller. Operators not rated for sub-20°F temperatures fail exactly when the gate needs to work. We install components rated for North Texas temperature swings and document the cold-weather specs on the job record.
Trusted Brands We Service in Keller
We install and service automation from FAAC, Viking, and DoorKing, along with five other major brands, so the operator on your new Keller gate is one our technicians know thoroughly. We do not steer Keller homeowners toward a replacement motor when the existing one can be rebuilt, and we carry the diagnostic tools and common parts to get a system running without waiting on a distributor. If you have an operator already on the property, we will work with it. If you need a new one, we’ll spec the right unit for the gate’s weight and Keller’s climate, not whatever we happen to have on the shelf.
Pricing for Gate Installation in Keller, TX
Here are the numbers, in writing, the same way we’d put them on your quote.
- Pedestrian gate, steel, with hardware: $800 – $2,200
- Single swing driveway gate, ornamental steel, no automation: $2,800 – $5,500
- Double swing driveway gate, ornamental steel, with automation: $5,500 – $9,500
- Custom estate gate with underground operator and entry system: $12,000 – $30,000+
- Sliding gate, steel, with operator: $4,500 – $11,000
- Operator-only install, matched to existing gate: $1,800 – $4,200
What moves the number in Keller: gate width and leaf weight, the specific automation brand, whether we’re matching an existing powder coat and picket profile, and whether HOA paperwork has to be filed before work starts. Post footing depth and soil conditions affect labor. The price we quote is the price you pay. It’s written down before anything is ordered or installed, and it does not shift after the posts are set. Call (817) 674-6552 for a free on-site measurement and a written number.
We Also Serve Cities Near Keller
Vance Gate Repair Coppell handles Gate Installation in Keller and the surrounding mid-cities communities, including North Richland Hills, Southlake, Colleyville, and Hurst. Our crews are in the Keller area weekly, so scheduling a measure and quote is straightforward whether you’re on the west side of 377 or over by Marshall Ridge.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Keller
Yes, in some Keller neighborhoods. Several HOA architectural review boards in the city require written approval before gate hardware, finish colors, or automation are changed, and the requirement applies to the operator just as much as to the gate itself. If your property has an active HOA design standard, we’ll help you identify the paperwork needed and make sure the hardware we spec matches what the board has already approved. The approval happens before we order materials or trench a line, which protects you from a forced redo and a violation notice. Call (817) 674-6552 if you want us to check your neighborhood’s requirements before you file anything.
Keller sits on expansive Blackland Prairie clay that shrinks during summer drought and swells after fall and winter rain, and a gate post set in a shallow footing moves with it. The fix on a new install is deep piers that reach below the active shrink-swell zone, proper steel reinforcement, and full curing time before the gate is hung. We photograph the footing depth and reinforcement before backfill, so you have a record of what was done under the ground. If your current posts are already leaning, we can reset them or replace them with deeper footings.
Yes, and we do this routinely in Keller. We’ll take a sample of the existing finish, match the powder coat tone, and fabricate the new gate to match the existing picket profile, spacing, finials, and scrollwork. Keller’s HOA-governed neighborhoods make this non-negotiable if a mismatched finish would trigger a design review violation. The finished gate is documented with photos against the existing fence line before we call the job done. This matching work is included in the written quote, not an afterthought upcharge.
Yes. UL 325 entrapment protection is required on any automated gate, and that applies in Keller whether it’s a driveway gate, a security gate, or a pedestrian gate. We install photo-eyes, contact edges, or both, depending on the gate type and application, and we test them in both directions before the install is complete. The specific devices used are documented on your job record. This is a safety requirement, not an option, and a gate without properly functioning entrapment protection can injure someone and create serious liability.
Yes. Underground swing-gate operators are a common request on Keller’s estate properties, where an above-ground arm would ruin the look of a custom ornamental gate. We install buried operator boxes with the motor below grade, tie in the keypad, intercom, and loop detector, and run the conduit cleanly to the panel. Underground operators usually add $3,000 to $6,000 over a standard above-ground operator depending on the gate size and soil conditions. The operator housing is sealed and rated for the conditions, and we document the install before backfill so the wiring path is on record. Call (817) 674-6552 and we’ll tell you whether your driveway layout suits an underground unit, and what it would cost.
Call Us for Gate Installation in Keller
We price every Keller gate installation in writing before work starts, we document the job with photos when we leave, and we stand behind the work for a full year. That’s the entire arrangement. Call (817) 674-6552 to schedule a free on-site measurement and a written estimate. A live person answers, any hour.
Written by Adrian Vance, Owner at Vance Gate Repair Coppell, serving Keller, Texas since 2014.
Gate Installation in Nearby Areas
