Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Grapevine, TX
Gate access control in Grapevine tends to fall into two camps: keypads and phone-entry systems retrofitted onto 1990s-era swing gates in HOA communities east of DFW Airport, and card readers or video intercoms at the wineries and event properties along Main Street. The same black clay that heaves fence posts also shifts gate frames enough to knock photo-eyes out of alignment and pull wiring loose inside the operator housing. If your gate opens when it should not, or will not open for the code that worked last week, call (817) 674-6552 and we will name the fault before we touch a tool.
Why Grapevine Homes Are Different
Grapevine’s gate work is shaped by three things that rarely show up together in one city. First, the soil. North Texas black clay expands hard after spring rain and contracts during summer drought, and in lakeside neighborhoods near Grapevine Lake the movement is extreme. Gate posts lean seasonally, hinges bind, and a gate that latched cleanly in March can drag across the driveway by July. Second, the housing stock. Residences range from pre-WWII bungalows near Historic Downtown to large-lot suburban homes built through the 1980s and 1990s, many inside master-planned communities whose original automated entry gates are now 25 to 35 years old and running on operators that manufacturers stopped supporting years ago. Third, the commercial corridor around the Gaylord Texan Resort and the Historic Downtown Urban Wine Trail. Those properties log thousands of gate activations per week, which means the failure pattern is different: worn limit switches, fatigued rollers, and loop detectors that stop reading vehicles. A technician who only ever works residential gates will misread those jobs.
Our Main Grapevine Services
Most Grapevine homeowners reach us for one of three reasons, and each has its own dedicated page with pricing and local detail.
Gate Repair in Grapevine
Repair calls in Grapevine usually begin with a symptom: the gate groans, sags, reverses mid-travel, or stops answering the remote. We trace the symptom to a physical cause, whether that is a bent hinge pin on an ornamental iron driveway gate or a control board that lost its limit settings after a spring storm. Black clay soil accelerates hinge and post wear here, so we check the frame before we blame the motor. See Gate Repair in Grapevine for the full breakdown.
Gate Installation in Grapevine
New gate installations in Grapevine have to account for expansive soil and, in many communities, HOA design review before the first post hole is dug. We measure the opening, confirm the swing or slide path, and write the scope so the footing depth and post diameter are sized for local ground movement. Ornamental steel and estate-style iron are common requests in the neighborhoods near Historic Downtown. Details are on the Gate Installation in Grapevine page.
Gate Motor & Opener in Grapevine
When a Grapevine gate moves but the operator fights it, or when the motor hums and nothing moves, the problem is usually the opener, the arm, or the control board. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment, and we repair before we recommend replacement. Operators on 1990s community entry gates are often repairable if the board is still sound. Read Gate Motor & Opener in Grapevine for costs and fault patterns.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Grapevine
Gate access control is the electronics that decide who gets in: keypads, remotes, phone entry, card readers, and video intercoms. In Grapevine we see two dominant call types. Older HOA subdivisions east of the airport run keypad and phone-entry systems installed in the mid-1990s, and those control boards are now failing at the same time the loop detectors in the driveway are losing sensitivity. Meanwhile, the wineries, tasting rooms, and event properties near Main Street and the Gaylord Texan corridor depend on card readers and video intercoms that have to work every time, because a stuck gate at a venue entrance is a paying customer turned away. That is the work we document on every visit, under Clause 4 of the Haven Standard. If you want the fuller picture of what this service covers, see Gate Access Control.
Keypad Entry
Signs you need it
The keypad accepts the code intermittently, works after multiple presses, or stops responding entirely after a heavy rain.
What it costs in Grapevine
Replacing or repairing a residential gate keypad in Grapevine typically falls between $180 and $340 depending on whether the wiring in the post is still serviceable.
How we do it
We test the keypad output at the control board, replace the unit or the damaged conductor, and photograph the programmed codes as proof of what was set.
Phone Entry
Signs you need it
Calls from the entry panel dial through but the gate does not open, or the system does not dial at all.
What it costs in Grapevine
Phone entry system repairs in Grapevine usually land between $220 and $425, with the higher end covering cellular-unit replacement rather than repair.
How we do it
We verify the dial tone or cellular signal, check the relay at the control board, and replace only the failed component instead of quoting a full system swap.
What Gate Access Control Costs in Grapevine
| Item | Typical range in Grapevine |
|---|---|
| Keypad repair or replacement | $180 - $340 |
| Phone entry system repair | $220 - $425 |
| Video intercom installation | $800 - $1,400 |
How fast can you get to a Grapevine gate access problem?
We dispatch locally to Grapevine the same day for access-control failures, and a live person answers the phone 24/7. Most keypad and phone-entry repairs are completed in one visit.
Do you work on access systems that were installed by another company?
Yes. We service equipment from DoorKing, Viking, Linear, and most other control boards already on the property. We document what we found and what we changed, so the next visit does not start from zero.
Gate Parts & Welding in Grapevine
Gate parts and welding covers the physical frame of the gate: hinges, posts, rails, rollers, and the welds that hold them together. In Grapevine, where clay soil heaves posts and shifts gate frames, hinge and post failures are the most common calls. A gate that scrapes the driveway on one side or pulls away from the post is a structural problem, not a motor problem, and replacing the operator will not fix it. See Gate Parts & Welding for the full scope of this work.
Hinge Replacement
Signs you need it
The gate sags visibly, drags at the latch side, or the hinge pins show visible wear and the gate no longer swings square.
What it costs in Grapevine
Hinge replacement in Grapevine typically runs $160 to $300 per hinge, depending on the weight of the gate and whether welding is required.
How we do it
We support the gate, cut out or unbolt the failed hinge, weld or fasten the new one in place, and confirm the swing path before we leave.
Post Replacement
Signs you need it
The post leans, the concrete pad cracks, or the gate drifts out of alignment after every rain cycle.
What it costs in Grapevine
Post replacement in Grapevine usually runs $425 to $900 per post, including the deeper footing needed for expansive clay soil.
How we do it
We set the new post in a concrete footing sized for Grapevine’s soil movement, then rehang the gate and verify the latch alignment.
What Gate Parts & Welding Costs in Grapevine
| Item | Typical range in Grapevine |
|---|---|
| Hinge replacement | $160 - $300 per hinge |
| Post replacement | $425 - $900 per post |
| Rail repair or welding | $150 - $400 |
Can you weld a gate without taking it off the property?
In most cases, yes. We do on-site welding for ornamental iron and steel gates across Grapevine, and we photograph the completed weld before we leave. For heavier structural repairs, we may recommend shop work.
Do you stock gate parts locally for Grapevine jobs?
Our trucks carry common hinges, rollers, brackets, and control-board components for the brands we service. Less common parts are ordered with a written price and lead time before any work begins. Call (817) 674-6552 to check availability for your gate.
Brands We Service in Grapevine
We service nine gate-automation brands on Grapevine properties, including Viking, Ghost Controls, DoorKing, and Elite. Common parts ride in our trucks, not a warehouse order form, which keeps most Grapevine repairs to a single trip. See our brands for the full list of what we open on site.
Pricing for Gate Repair in Grapevine, TX
| Service | Typical range in Grapevine |
|---|---|
| Keypad repair or replacement | $180 - $340 |
| Phone entry system repair | $220 - $425 |
| Video intercom installation | $800 - $1,400 |
| Hinge replacement | $160 - $300 per hinge |
| Post replacement | $425 - $900 per post |
| Rail repair or welding | $150 - $400 |
| Gate roller replacement | $120 - $280 per roller |
Prices in Grapevine push higher when the soil has shifted a post far enough that the footing must be redone, or when an HOA requires specific materials that match the original gate. Every estimate is written and handed to you before any work starts, with the parts and labor separated so the final invoice matches the quote.
Neighborhoods We Serve in Grapevine
We take calls from every corner of Grapevine, from the historic streets near Main Street to the newer subdivisions on the east side. Most repair calls in the city are reached within 30 to 45 minutes.
- Historic Downtown Grapevine
- Silver Lake Estates
- Timberline
- Heritage Estates
- Lakeview at Grapevine
Service Area - Cities Near Grapevine
Our Grapevine crews also cover the cities around the airport and up toward the lake. If you are in Southlake, TX, Colleyville, TX, Euless, TX, or Coppell, TX, the same written-pricing standard applies.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Grapevine
For gate failures that leave a driveway blocked or a property unsecured, we dispatch to Grapevine the same day. A live person answers the phone 24/7, and we give you a technician’s name and a time window before they arrive.
Many Grapevine HOAs, especially in master-planned communities built since the 1980s, require design review for gate replacement or visible changes like new posts or a different gate material. Repairs that match the existing gate usually do not. We can provide the written scope and material list your HOA asks for.
Yes, including wineries and tasting rooms on the Urban Wine Trail, resort and conference properties near the Gaylord Texan, and HOA community entry systems on the east side. Commercial gates have different failure patterns and higher cycle counts, so we inspect the operator, loop detectors, and photo-eyes together. Call (817) 674-6552 for a free estimate, and we will put the price in writing before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grapevine Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.