Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Arlington, TX
Gate access control in Arlington usually comes down to two jobs: installing a keypad, intercom, or card reader on an existing gate, or repairing the wiring and hardware that Texas clay soil and heat have slowly pulled apart. Most Arlington homes were built between the late 1960s and mid-1990s, and their gate posts rarely sit deep enough to stay plumb through a full drought cycle. That movement stresses every wire, bracket, and sensor connected to the gate. Call (817) 674-6552 when a gate stops responding or an opener stops reading the code.
Why Arlington Homes Are Different
Arlington sits on Blackland Prairie clay that shrinks hard in summer and swells in fall. A cedar gate post set 16 inches deep in 1985 has spent forty years twisting a little more each season. By now, the gate at the Green Oaks corridor or east of Collins Street may strike the fence panel before it fully opens, and no hinge adjustment fixes a post that has moved out of the ground.
North Texas heat compounds the problem. Surface soil temperatures above 130°F make wood boards cup and pull from their frames. Hardware flexes more than it would on stable soil. South Arlington’s newer neighborhoods near Mansfield tend toward ornamental iron and aluminum, where the failures shift from rot to motor alignment and sensor drift. In both cases, the repair has to account for the dirt first and the steel second.
Our Main Arlington Services
These are the three calls Arlington homeowners make most often, each linked to its own detailed page.
Gate Repair in Arlington
Older Arlington gates fail where wood meets steel: hinge lag bolts strip out of soft cedar, strap hardware rusts through, and misaligned posts make latches stop catching. We pull the gate, reset or replace what moved, and photograph every adjustment before we leave. See Gate Repair in Arlington for the full repair breakdown.
Gate Installation in Arlington
New gates in Arlington should be planned around the active clay zone. We set posts 24 to 30 inches deep, add proper concrete footings, and size the frame for the soil movement we know is coming. The result is a gate that still opens cleanly in August of a drought year. Full details on Gate Installation in Arlington.
Gate Motor & Opener in Arlington
Arlington’s heat and clay shorten the life of opener brackets and arm mounts. When a motor runs but the gate drags, the problem usually traces back to a post that moved or a bracket that loosened under repeated thermal cycling. We service nine automation brands, including LiftMaster and DoorKing. See Gate Motor & Opener in Arlington.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Arlington
Gate access control in Arlington means the keypad, intercom, card reader, or phone-entry system that tells the opener whether to move. On Arlington’s older brick-veneer ranches, the weak point is almost always the low-voltage wiring run along a wooden fence line where heat, moisture, and post movement have taken a toll over 20 to 30 years. We work on Gate Access Control systems across the city, from simple keypads to full card-reader and video-intercom setups.
Keypad Entry
Signs you need it
Codes stop working intermittently, or the keypad works only after several presses.
What it costs in Arlington
Keypad replacement or repair typically runs between $180 and $420, depending on the brand and whether wiring needs replacement.
How we do it
We test the existing wiring for continuity, replace the keypad or harness, reprogram codes, and photograph the finished installation.
Video Intercom
Signs you need it
The screen stays blank, audio cuts out, or the call button no longer triggers the gate release.
What it costs in Arlington
Video intercom repairs generally fall between $250 and $650, and full replacements run higher depending on camera and monitor configuration.
How we do it
We trace the signal path from the gate station to the indoor monitor, replace failed components, and leave a written record of every part number.
What Gate Access Control Costs in Arlington
| Item | Typical range in Arlington |
|---|---|
| Keypad replacement or repair | $180-$420 |
| Video intercom repair | $250-$650 |
| Card reader or phone-entry repair | $220-$520 |
Can you add a keypad to an existing Arlington gate?
Yes. We wire the keypad into the existing opener, program your codes on site, and hand you a written record of the setup. The price is quoted before any work starts.
Why does my Arlington gate opener work only sometimes?
Intermittent operation usually points to a wiring fault, a failing limit switch, or a post that has moved and thrown off the sensor alignment. We test each component and show you what we found.
Gate Parts & Welding in Arlington
Gate parts and welding in Arlington handle the physical failures that automation cannot fix: rotted hinge posts, rusted strap hardware, sagging frames, and broken weld joints. On Arlington’s north and east sides, cedar gates from the 1980s and 1990s are reaching the end of their hardware life all at once. Our Gate Parts & Welding service covers structural repairs, replacement hardware, and custom steelwork, with every job documented by photo.
Hinge Replacement
Signs you need it
The gate drags on the ground, sags away from the latch, or the hinge bolts pull loose from the post.
What it costs in Arlington
Hinge replacement runs between $90 and $260 per hinge, including hardware rated for gate weight.
How we do it
We remove the old hardware, bolt or weld the new hinge into place, and reset the gate to level.
Post Replacement
Signs you need it
The post leans, the gate catches the fence before it opens, or concrete at the base is cracked and dropping.
What it costs in Arlington
Post replacement typically costs $300 to $700, including digging through the active clay zone and setting a deeper footing.
How we do it
We break out the old footing, set the new post 24 to 30 inches deep, pour concrete, and rehang the gate level.
What Gate Parts & Welding Costs in Arlington
| Item | Typical range in Arlington |
|---|---|
| Hinge replacement | $90-$260 per hinge |
| Post replacement | $300-$700 |
| Custom welding | $120-$450 per job |
Can you weld a broken gate frame in Arlington?
Yes. We weld cracked steel and ornamental iron frames on site when possible, then clean, prime, and photograph the repair. We quote the weld job before starting.
Why does my Arlington gate keep sagging after I tighten the hinges?
Sagging almost always means the post moves in Arlington’s clay soil or the frame wood is soft. Tightening hardware against a moving post cannot hold. We address the footing first.
Brands We Service in Arlington
We service LiftMaster, DoorKing, Elite, and Mighty Mule, among nine automation brands total. Common parts for these systems are stocked locally, which keeps most Arlington repairs to a single visit. See our brands for the full line card.
Pricing for Gate Repair in Arlington, TX
| Service | Typical range in Arlington |
|---|---|
| Keypad replacement or repair | $180-$420 |
| Video intercom repair | $250-$650 |
| Card reader or phone-entry repair | $220-$520 |
| Hinge replacement | $90-$260 per hinge |
| Post replacement | $300-$700 |
| Custom welding | $120-$450 per job |
| Gate motor or opener repair | $180-$550 |
| Gate installation | $1,500-$6,000 |
Arlington prices push toward the higher end when the post footing has to be dug past the active clay zone, or when heat-damaged wiring must be rerun. Every price is written down and handed to you before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Arlington
We run gate repair calls across Arlington, from the older subdivisions east of Collins Street to the newer communities near the Mansfield border. Our typical response time for most Arlington neighborhoods is same-day or next-morning, with 24-7 phone coverage for emergencies.
- Dalworthington Gardens
- Pantego
- North Arlington near River Legacy
- Southwest Arlington near Lake Arlington
- Green Oaks corridor
Service Area - Cities Near Arlington
We also cover the surrounding cities where Arlington homeowners often refer their friends and family. If you are a few miles over the line, we still dispatch locally. That includes Grand Prairie, TX, Hurst, TX, North Richland Hills, TX, and Bedford, TX.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Arlington
A live person answers the phone 24 hours a day. For urgent failures like a gate stuck open or a motor that will not stop, we typically dispatch within the same day across Arlington, often within a few hours depending on where the crew is working.
Most gate repairs on existing structures do not need a city permit. Some Arlington HOAs do require approval for visible changes like a new gate style or finish, so we recommend checking your covenants before an installation. We handle the technical work either way.
Yes. The written price is handed to you before any tool comes off the truck. That is Haven Standard Clause 1, and it applies to every job we do in Arlington, from a single hinge to a full access-control system. Call (817) 674-6552 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.