Gate Installation in Irving - Free Survey, One Written Price

Fast, Reliable Gate Installation Across Irving

A new driveway or security gate in Irving usually runs between $2,800 and $11,400 installed, depending on whether it’s a single swing gate, a double swing, or a slide gate, and whether the HOA requires ornamental iron match work. Most installations in Irving take 3 to 7 working days from post footing to final opener programming, though HOA architectural approval can add two to four weeks before we ever break ground. We work across all of Irving, from Valley Ranch to Las Colinas to Hackberry Creek, and we answer the phone at (817) 674-6552 around the clock. Lead with the approval process, because in Irving that’s the part that stalls projects, and we’ll walk you through it from the first call.

Call (817) 674-6552

Why Vance Gate Repair Coppell Is Irving’s Preferred Gate Installation Company

Irving is not one market. It’s two. Valley Ranch and Hackberry Creek run on 1980s-era HOA gates with architectural committees that enforce every curb detail, while Las Colinas asks for commercial slide gates that cycle hundreds of times a day. Our founder, Adrian Vance, built this company doing commercial access-control work starting in 2014, and that background is exactly why Irving homeowners and property managers call us. One technician can install a LiftMaster swing operator on a Hackberry Creek driveway gate on Tuesday and spec a cantilever slide gate with card-access integration on a Las Colinas campus on Thursday. That range matters in this city more than anywhere else in the metro.

Every Irving job, residential or commercial, gets a written price before the first tool comes off the truck. That’s Haven Standard Clause 1, and it’s not a courtesy; it’s how we document every job. Before we leave, you get a photo log of the post footings, the opener mounting, the photocell alignment, and the wiring terminations, plus a written record of every part number installed. Our Gate Installation team has completed 22,000+ gate repair and installation jobs since 2014, each one with that same written price and photo record.

Irving customers call us because the 365-Day Done Right Promise means something specific here. If an HOA gate fails inspection, if a post shifts six months after the pour, if the opener faults, we come back and make it right at no charge for a full year. No argument. No fee. That promise gets tested harder in Irving than most places, given the clay soil, and it has never expired on us mid-claim.

Our Gate Installation Services in Irving

Driveway Gate Installation

Driveway gates in Irving split into two worlds. In Valley Ranch and Hackberry Creek, most driveway gates are ornamental wrought iron matching the original 1980s buildout, and the HOA likely has a style sheet. In Las Colinas townhomes and newer infill, we see more modern steel and aluminum designs with keypad entry. A single swing driveway gate, fully installed with a new operator and two remotes, typically runs $2,800 to $7,200 in Irving depending on gate width, post condition, and whether we’re pouring new footings deeper to handle the clay. Double driveway gates run higher because we’re setting four posts, not two.

Pedestrian Gate Installation

Pedestrian gates in Irving are often the easiest project on paper and the most tangled in practice, because they usually tie into an HOA’s shared entry system. You need a gate that matches the community’s iron pattern, swings in the direction the HOA’s traffic plan dictates, and integrates with whatever keypad or fob reader the association already runs. A freestanding pedestrian gate with a maglock or electric strike and a basic keypad typically runs $1,900 to $4,600 in Irving. If the HOA requires a welded ornamental match to the main entry gate, budget toward the top of that range.

Sliding Gate Installation

Sliding gates in Irving aren’t just a Las Colinas commercial product. Plenty of Irving homes with short setbacks or angled driveways need a slide gate because a swing gate would clip the garage or block the sidewalk. Cantilever slide gates, the kind that don’t ride on a ground track, are the right call in Irving specifically because ground tracks sink and bind in Blackland Prairie clay. A residential cantilever slide gate with a modern operator and safety edges typically runs $4,800 to $11,400 in Irving. Commercial slide gates for corporate campuses run higher and depend on cycle rate, card-access integration, and UL 325 entrapment protection requirements.

Swing Gate Installation

Swing gates are the default in Irving’s HOA communities, and for good reason: they match the ornamental language of the original buildout. But this is where post footings matter more than the gate itself. Irving sits on expansive clay that swells and contracts through wet and dry cycles. We pour footings significantly deeper than code minimum here, and we set posts in concrete that’s reinforced to resist the heave that pulls swing gates out of plumb within two or three years. A single swing gate with a new operator and full entrapment protection runs $2,800 to $6,900 in Irving. Double swing gates, common on wider Valley Ranch driveways, run $5,500 to $10,800.

Before

After

Trusted Brands We Service in Irving

Irving homes and commercial properties run a mix of old and new automation. We regularly install and service BFT, Linear, Viking, and Ghost Controls operators alongside LiftMaster and FAAC, and we don’t steer you toward a brand you don’t need. The February 2021 ice storm did real damage to exposed operators in Valley Ranch and Hackberry Creek, and many of those units are still limping along. For Irving customers, we keep common Linear and BFT control boards and safety edge components stocked on our trucks, which shortens the time between diagnosis and a working gate. If your existing operator can be repaired responsibly, we’ll repair it and document the work. If the control board is obsolete, we’ll show you the conversion options and price both paths in writing.

Common Gate Installation Problems We See in Irving Homes

Every city has a gate personality. Irving’s comes from its HOAs, its clay, and its aging first-generation operators. Here’s what we see most in Irving specifically:

• HOA architectural rejection on style, height, or finish. Valley Ranch and Hackberry Creek committees enforce their 1980s-era design standards strictly. A gate that’s six inches taller than the original or a powder-coat finish that drifts from the approved palette gets bounced. We work from the HOA’s written standards from day one and often submit the application as part of the installation package.
• Posts heaving out of plumb within two years. Irving’s Blackland Prairie clay expands and contracts dramatically. Standard footings poured to typical code depth will eventually move in this soil. We dig deeper, reinforce wider, and photograph the pour so you have a record of what’s underground before we set the gate.
• Shared entry systems that stop working after a new operator goes in. Older Valley Ranch communities run loop detectors and keypad protocols that don’t always talk cleanly to a modern operator. If the installer doesn’t integrate the existing loop circuit and resident access protocol, residents get locked out or the gate ghost-triggers. This is standard integration work for us, not an add-on.
• Obsolete control boards on original 1980s operators. Many of Irving’s original swing gate operators predate UL 325’s 2016 entrapment protection standards. When those boards die, there is no direct replacement. A repair call becomes an operator conversion, and homeowners need a written price for the full conversion before work starts. That’s exactly how we quote it.

Pricing for Gate Installation in Irving, TX

We Also Serve Cities Near Irving

Our Gate Installation in Irving work regularly takes us just beyond the city line. We serve Dallas, Grand Prairie, Carrollton, and Coppell with the same written pricing, photo documentation, and 365-Day Done Right Promise. If you’re in one of those cities and need a gate installed, call the same number: (817) 674-6552.

FAQs - Gate Installation in Irving